Many questions about the staging and imaging and its application in our vehicles. Actually what is staging? And what is the imaging? Let us peeled one by one in this article.
Note this article is intended to staging and imaging in everyday contexts and not in the context for the contest and others.
Staging can be defined as a place where musicians play the musical examples on the concert stage, recording studio, in the pub, in restaurants and others.
There is a derivation of this staging is a high stage (stage height), width of the stage (stage width) and depth of the stage (stage depth).
The bottom line is dependent on the stage where he recorded the acoustic conditions (ambience) and also influenced by the acoustic point of recording is reproduced.
Many systems are able to produce excellent tonal accuracy, but failed to reproduce the ambience of the recording. What causes it?
Acoustics. Plays a very large acoustic sound reproduction is produced for example when recording 35 songs in the Cathedral choir girls who are physically Westminster Abbey has a stage width of 45 meters, 15 meters stage height and stage depth ranging from soprano to alto at the front to the back of 9 meters and the distance to the recording microphone about 6 feet.
It would be hard pressed to be perfectly reproduced in the distance the car pillar to pillar width for example is only 1 meter high and 1.4 meters which is only 0.4 meters.
Thus required a careful planning and use of quality tools to reproduce approaching its original condition.
Imaging is the position of each of the singers on the stage is clear and obvious example, the lead singer in the accompaniment in the left, the organist at the right. So imaging is the content or content that our voices are heard on stage.
Here we see clearly that the actual staging and imaging are interrelated, which is why often both of these things are often juxtaposed.
Well what can be done is to reproduce in proportion to the installation and setting carefully.
Generally with the help of first-class installation techniques, audio device on board, and Angling accurate positioning, cutting x-over, and assisted by a special device or a kind of equalizer and DSP (Digital Sound Processor), the staging and imaging can be reproduced at least approach although it does not can be perfect 100 percent of the original sound.
That's what makes the writer impressed with the skill installers in Indonesia. Because it is often achieved in a full condition limitations.
Now how to get the staging and imaging are step by step? Here are some tips that can be done.
A. Choose a car with a wide and flat contour of the dashboard, as much as possible the type of single cabin as MPV or SUV (but by no means sedan not only a greater challenge). Useful to get the pillar to pillar width and depth of the dashboard is ideal for ideal positioning and Angling.
2. Installing and setting in the installer is experienced and willing to work on this project carefully and are patient enough in a comprehensive setting.
3. Attach damper well on the ground floor, doors, ceilings, hood, including spakbor and dashboard. Do this carefully so that road noise, engine noise and mechanical noise can be reduced as low as possible
4. Choose Head Units, Power, including the processor that has a speaker distortion and noise as small as possible so that the outcome more predictable.
5. Often audition live concert and CD recording livenya use as a comparison
6. Speaker Placement, attach the speaker midbass, midrange and tweeter at the adjacent position and try to have a different path length difference between the thin left and right speakers. I saw some cars use the kick panel to anticipate this. However, the ideal stage for high-mounted tweeters should be ear height. For that experiment is the key!
7. Setting the tonal balance in advance do not rush to catch up staging and imaging (on this subject will be discussed in a special article about the tonal balance). Believe balanced tonal balance that will help produce an accurate staging and imaging. If you use the eq then use eq with independent channels with a lot of the band in order to solve problems in a given frequency either peak or dip
8. Crossover settings either passively or actively with a planned experiment, use the most optimal cut point based on the specifications of the speakers. Special attention shall be made on a different speaker brands and series.
9. Use the time alignment (if you use the processor) carefully, carefully measure and seek a stable focus in the middle of the stage. Focus on sound chair balanced on a single position or two-seat listening position (dual listening position.
10. Keep track and repeat the process if there is a shortage in the process.
Also do not forget that the ideal staging and imaging is not impressed sound strange, phasey and as far-fetched. He should have created a strong impression of the stage and the whole image. Well good luck, good luck!
No comments:
Post a Comment